1200 Watt 12/24/48 Vdc - 230 VAC Victron Phoenix Inverter
Warning: Last items in stock!
SinusMax – Superior Design
Developed for professional use, the Phoenix range of inverters is ideal for countless applications.Our design criteria have been to produce a true sine wave inverter with optimized efficiency, without compromising performance . By using hybrid HF technology , we get as
the highest quality product with compact dimensions , light weight and capable of supplying power, seamlessly, at any load.
Additional Starting Power
One of the unique characteristics of SinusMax technology is its high starting power. The
Conventional high frequency technology does not offer such extreme performance . Phoenix inverters,
however, are well suited to power difficult loads such as computers or low voltage power tools.
Transfering the load to another AC source : The automatic transfer switch.
For lower power models we recommend the use of our automatic transfer switch
" Filax " . The switching time " Filax " is very short ( less than 20 milliseconds ) , so that
computers and other electronic equipment will continue to operate without disruption .
Please consult the manual for a description .
ON / OFF remote switch
Remote connector for on / off available on all models .
Remote Control Panel (only 750 VA model )
It connects to the inverter with a RJ12 UTP cable ( 3 meter in length, included).
DIP switches to select 50 or 60 Hz ( 750 model only VA )
DIP switches to sleep mode (only 750 VA model )
When operating in sleep mode , the current is not dedicated so the charge is reduced by one third of its nominal value . Thus, the inverter will shut down if there is no charge , or if there is very little , it will reconnect every two seconds for a short period of time. If the output current exceeds a preset level, the inverter will continue running. Otherwise, the inverter will shut down . With DIP switches on / off level can establish itself between 15W and 85W.