375 Watt Victron Inverter

New product

12/24/48 VDC 230 VAC 375 Watt Victron Phoenix Inverter
Pure Sinewave

More details

126,83 €
tax incl.

More info

Pure sinewave output, high peak power and high efficiency.

Combined high frequency and line frequency technologies ensure the best of both worlds.

Models range from 150VA to 3000VA per module.

Scalable: up to six Phoenix Inverters 3000 can be paralleled in single phase,split phase and three phase configuration. Two New Models available: 12V 800VA and 12V 1200VA New & improved design, very high peak power. Extra features of the models: 800VA: Improved peak power capability 1200VA: Extremely compact housing

SinusMax – Superior Design

Developed for professional use, the Phoenix range of inverters is ideal for countless applications.Our design criteria have been to produce a true sine wave inverter with optimized efficiency, without compromising performance . By using hybrid HF technology , we get as the highest quality product with compact dimensions , light weight and capable of supplying power, seamlessly, at any load.

Additional Starting Power

One of the unique characteristics of SinusMax technology is its high starting power. The Conventional high frequency technology does not offer such extreme performance . Phoenix inverters, however, are well suited to power difficult loads such as computers or low voltage power tools.

Transfering the load to another AC source : The automatic transfer switch.

For lower power models we recommend the use of our automatic transfer switch " Filax " . The switching time " Filax " is very short ( less than 20 milliseconds ) , so that computers and other electronic equipment will continue to operate without disruption .

Diagnostic LED

Please consult the manual for a description .

ON / OFF remote switch

Remote connector for  on / off available on all models .

Remote Control Panel (only 750 VA model )

It connects to the inverter with a RJ12 UTP cable ( 3 meter in length, included).

 DIP switches to select 50 or 60 Hz ( 750 model only VA )

DIP switches to sleep mode (only 750 VA model )

When operating in sleep mode , the current is not dedicated so the charge is reduced by one third of its nominal value . Thus, the inverter will shut down if there is no charge , or if there is very little , it will reconnect every two seconds for a short period of time. If the output current exceeds a preset level, the inverter will continue running. Otherwise, the inverter will shut down . With DIP switches on / off level can establish itself between 15W and 85W.